How to Apply 3D Undercover At Home Lash Extensions

LEARN ABOUT

Applying Undercover Lash Extensions

HOW TO APPLY

3D UNDERCOVER LASH EXTENSIONS

STEP 1

Start with clean, dry lashes. Apply LASH ANOTHER DAY Extended Wear Lash Bond to your natural lashes as you would mascara. Using the spoolie, focus on applying the adhesive to the base of your lashes.

Pro tip: Use the ball tip to concentrate the bond at the base of your lashes for a secure hold.

STEP 2

Carefully remove lash cluster #1 from the tray. Apply LASH ANOTHER DAY Extended Wear Lash Bond to the band on the inside of the lash cluster using the ball tip & allow it to dry for 20-30 seconds before beginning application.

STEP 3

Starting at the outer corner of your eye, use the applicator to apply lash cluster #1 to the underside of natural lashes as close to the waterline as possible, without touching it.

Using the flat edge of the applicator tip, gently press the cluster into the underside of your lashes and then allow to dry for 15 seconds before applying the next cluster.

Pro Tip: If your applicator becomes sticky during application, clean with alcohol or an oil free makeup remover.

Repeat Steps 2 & 3 until the eye is complete, applying each additional cluster next to the previous one moving toward the inner corner of the eye. Depending on the size of your eye or desired look, inner corner clusters #4 and #5 may not be needed.

STEP 4

Slide the curved side of the applicator tip around your lashes to bind the lash clusters to your natural lashes. Press and hold in sections for 10-20 seconds.

Repeat steps 1-4 on your other eye.

STEP 5

Once done applying clusters, apply MY LASHES ARE SEALED Lash Top Coat above and below your lashes. Use the ball tip to lightly dab along the base of the clusters, focusing on the inner and out corners.